Аккумуляторы Apple для iPhone 4s

Apple

Один магазин для покупки всех товаров вашего любимого бренда

Tips for Replacing Your Apple iPhone 4 Battery

Over time, the Apple iPhone 4 battery can lose its charge. When this happens, you can replace it at home using a kit or tools you already have on hand. You can find a variety of options for iPhone battery replacement so that you can keep using your iPhone 4.

How can you tell the iPhone 4 battery needs replacement?

If the battery's charge does not last long on your Apple iPhone, you may need a new battery. Other symptoms may include apps and other programs draining your iPhone in a short amount of time. You should also check whether the charging cable is working. Sometimes a low battery charge may be due to a faulty charger. Over time, these products can become cracked or damaged. You usually won't know there is an issue until the phone fails to charge. Once you have ruled out the cable, you may find it is time for a battery replacement.

What batteries are compatible with the Apple iPhone 4?

Before replacing the battery, you need to make sure that the replacement is compatible with the iPhone 4, so it will not affect your smartphone's performance. You can always verify your model number on the phone. With that information, you can find a replacement battery that will get your phone working again.

What tools are needed to complete the repair?

You will need a set of tools in order to replace the battery in your iPhone 4. Necessary tools are often included with replacement batteries. You can also find them sold together as a kit.

The tools you will need include:

  • Screwdriver
  • Suction cup
  • Opening tool, also called a pry tool or spudger
  • Heat source
How do you replace the battery?

Each phone model may have a slightly different procedure, so refer to owner's instructions. The process to replace an iPhone 4 battery can typically be completed at home following these general steps:

  • Step 1: Turn off the iPhone.
  • Step 2: Remove the bottom screws on the device.
  • Step 3: Use a suction cup to lift the screen. Be careful not to break the glass screen. A pry tool may also be helpful to separate the screen from the back of the phone.
  • Step 4: Completely remove the screen from the iPhone to prevent any damage.
  • Step 5: The battery is glued to the back of the phone. You can use a heat source to warm up the iPhone and to pry the battery out.
  • Step 6: Set the new battery in place. You may want to use some adhesive to keep it in its correct position.
  • Step 7: Power the iPhone back on to make sure the battery works.
  • Step 8: Reattach the screen.
Content provided for informational purposes only. eBay is not affiliated with or endorsed by Apple.

Категории